TPEs are materials of choice for medical devices

Medical device manufacturers are turning to thermoplastic elastomers (TPEs) for applications that require flexibility

Medical device manufacturers increasingly turn to thermoplastic elastomers (TPEs) for applications that require flexibility or rubber-like elasticity. These compounds have replaced alternative materials like thermoset rubber and PVC in standard applications like tubing, bags, pouches, drip chambers, masks, cushions, syringe tips, ventilator bags, luers, stoppers, gaskets, seals, and dropper bulbs. And as designers have come to appreciate the value of TPEs, more and more are using these elastomers for new applications.

Versatility is one reason for the growth of TPEs in medical devices. TPE compounds now on the market meet a range of end-use requirements and for any given application, there may be two or more chemically different TPE types on offer by suppliers.

Within this selection of TPEs, hardnesses can range from ultra-soft or gel-like to semi-rigid; optical properties can range from water clear to opaque; and there are grades available to meet most requirements for strength, low-temperature toughness, heat stability, and chemical and UV resistance. TPEs can be injection or blow moulded, multi-material- or insert-moulded, and extruded or co-extruded into film, sheet, profiles, or tubing.

TPEs are excellent candidates for medical applications due to their chemical inertness or ‘clean’ ingredients. Medical grade TPEs are made with FDA compliant raw materials and are free of phthalates and latex proteins. In addition, TPEs are inherently designed to have extremely low extractables or leachables, even when in contact with aqueous based systems (like bodily fluids).

Besides versatility, a second reason for TPE growth in medical devices involves their advantages over alternative materials. The most obvious advantages stem from the fact that TPEs are thermoplastics. They process more efficiently and economically than thermoset rubber, provide greater design freedom, exhibit a wider range of color options, and, unlike rubber, can be recycled. At the same time, TPEs provide device manufacturers with a means of obtaining comparable or even superior properties while avoiding problems associated with certain alternative materials. This has been particularly apparent in replacement of the following:

● PVC. In the medical device industry, there is movement away from PVC compounds due to the phthalate plasticizers they contain. Although phthalate-free PVC compounds are available for medical applications, many medical device manufacturers are still concerned with the life cycle management of PVC and are looking for alternatives.

● Latex. Medical manufacturers seek alternatives to latex due to protein allergies, concerns with the level of extractables or leachables from the cure system, and odor. Another factor is economics: Processing rubber is more laborious than processing TPEs, and TPE processing scrap is recyclable. Typical applications include extruded film and dipped anesthesia bags.

● Silicone rubber. Often silicone is over-engineered for applications which don’t require high heat resistance or low compression set at elevated temperatures. Silicone surely has its benefits, including being able to withstand multiple sterilization cycles, but for certain applications, Medalist TPEs are a more cost-effective alternative. In many cases, they offer improvements over silicone. Typical applications where TPEs can be used instead of silicone are drainage tubing, bottles, and bags; peristaltic pump tubing; face mask cushions; resuscitation bags; and seals, gaskets, and diaphragms.


Source:https://www.medicalplasticsnews.com/news/flexible-working/